Babymattress nature luck
Baby mattress with high-quality natural latex made of 100 % natural materials
Height: 9 cm
All product details

Mattress cover
Controlled organic cultivation cotton
This mattress cover made from 100 % controlled organic cultivation cotton is air-permeable, washable up to 40 °C and suitable for gentle machine drying.

Mattress core
- high-quality latex-coated coconut in combination with nubbed natural latex for very good lying comfort | 100% natural
- good ventilation thanks to vertical air channels in the natural latex
- baby side (natural latex) and toddler side
Washable at 40 degrees
do not bleach
Suitable for gentle machine drying
do not iron
No textile care

Divisible cover


Natural latex
Latexed coconut
Virgin sheep's wool
Certified organic cotton
KBA stands for controlled organic cultivation. Absolutely no artificial fertilizers, pesticides or defoliants are used.
- Keep away from fire and heat sources:
This product must not be placed near flames, stovetops or other heat sources to avoid the risk of fire and serious injury. - Remove all the packaging before use:
Before using the product, remove all packaging components, including films, tapes and labels, to reduce the risk of injury or accidents. - Do not use the product if it is damaged:
Do not use the product if any of the parts are broken, ripped or damaged. Any further use could cause injury or danger to children. - Make sure that the face of the child is not covered:
Make sure that the face of the baby remains completely uncovered to prevent obstruction of breathing and overheating. - Danger of accidental swallowing of products with zip fasteners:
Products with zips contain small parts that could be swallowed by little children. Supervise them at all times during use and ensure that the zip is properly closed. - To be used under adult supervision
You can find out more in the instruction manual.

All covers for Träumeland mattresses (with the exception of our children’s and teenagers’ mattresses, excluding floor-level mattresses) comply with safety standards and therefore do not have a traditional zip.
In accordance with the current mattress standard, our mattresses have a safe fastening without a zip, so that children cannot open the mattress cover. To open the fastening, a tool (e.g. a paper clip, etc.) must be used temporarily.

Your mattress has been lovingly rolled, which means the quality of the materials is in no way adversely affected. Once the outer film has been carefully removed, the mattress will ‘plump up’ and its full functionality will unfold in a matter of minutes. The edges of the mattress may take a little longer. Please note that it can take 2-3 days for the mattress core to reach its full volume once removed from its roll packaging. You can use the mattress as normal during this time.
TIP: By rolling the mattresses, we can reduce the transport volume massively, cut CO2 emissions, save packaging material and be kind to our environment.

For baby and children's mattresses, a tolerance of -0/+2.5cm applies to both the mattress width and length. The height of the baby mattress must be within the tolerance range of +0/-10mm. For children's and youth mattresses, the tolerance is +/- 10mm.
If the size difference is outside the tolerance range, please contact our customer service.
A template is required for all mattresses with special dimensions (except square mattresses).
Baby mattresses with Träumeland "sleep safety" or "sleep dry" covers do not require an additional cover for moisture protection, provided the baby is wearing a diaper. These covers have the moisture protection function* integrated in the mattress cover. Additional wetness protection pads not only stop moisture but also ventilation and should therefore not be used.
* Wetness protection means that small amounts of liquid can be absorbed by the cover if, for example, your baby's diaper is too full. Large amounts of liquid cannot be absorbed.
Our mattresses are rolled and vacuum-packed for transportation reasons. To allow the materials to unfold optimally after unpacking, we recommend that you do not store the mattress in a rolled state for too long.
Our recommendation:
A rolled mattress should be stored in its packaging or rolled state for a maximum of 3 months.
If the mattress is stored for much longer, the foam core may not unfold completely or only very slowly after unpacking. As a result, the mattress may temporarily or permanently not fully regain its original shape.
Our tip:
Open the mattress as soon as possible after purchase and give it sufficient time to fully unfold after unpacking. As a rule, the mattress will reach its final shape within a few days.
Sustainable children’s mattress
For small dreamers with a big responsibility
Our Better dreams mattresses are based on a single principle:
from the very start, babies deserve the safest, healthiest and most sustainable sleeping environment.
For over 50 years, Träumeland has been developing mattresses that breathe, protect and support. They are produced in an environmentally friendly way in Austria – with plenty of handcrafting, short supply chains and a genuine awareness of our children’s future.


Sustainable sleep right from the start
Better dreams stands for consistent sustainability. Not as a trend, but as a philosophy. Every single stage of production is scrutinised, optimised and made transparent.
✔ Raw material offcuts are reused
Foam offcuts are processed into new composite foam or Comfort pads, and fabric scraps are recycled into raw fibres. Packaging boxes? They are returned to the cycle.
✔ High-quality materials from Europe
We use materials sourced exclusively from Europe to ensure fair manufacturing practices.
Made in Austria
We are a family-run business. Every mattress is created through meticulous craftsmanship, close collaboration with regional partners and fair working conditions. Production is guided by the philosophy that has always defined the company: to manufacture baby and children’s products as if they were intended for our own children.
Träumeland is personal, down-to-earth and responsible.

Better Dreams mattresses - What makes them special?

Looking for the right mattress for your baby/child?
The Träumeland mattress finder will help you find it
You might also like
Sustainable children's mattress made from recycled production waste & high-quality, sustainable flake and OrbisTM special foam
Height: 15 cm
Sustainable baby mattress with cold foam twists and additional 3D air cushion layer in the twists for point-elastic lying comfort and even better ventilation. Mattress core with ventilated safety edge and 2 firmness levels; multifunctional "sleep safety" cover with moisture protection, extra wide ventilation band and TENCEL™ x REFIBRA™ fibres for a sustainable future and minimized sweating.
Height: 11.5 cm
Baby mattress with unique More-way ventilation system in combination with the multifunctional cover "sleep saftey" with wide ventilation band for ideal air circulation and TENCEL™ fiber against sweating; the mattress has ventilated step edges and 2 firmness levels.
Height: 11 cm
Stiftung Warentest overall rating GOOD (1.8)
Baby mattress with ventilated safety edges, 3D comfort pads made of open-pored cold foam for maximum point elasticity and breathable 3D air cushion material in combination with vertical air channels for excellent ventilation; Multifunctional ‘sleep safety’ cover with ventilation strip, moisture protection and TENCEL™ fibre for a comfortable sleeping climate without excessive sweating.
Height: 11 cm ((Exception: mattress measuring 70 x 170 cm has a height of 10.5 cm)

